Bont Zero+ Road Shoes
|Narrow Fit <||83||84||86||87||88||90||91||92||93||95||96||97||99||100||101||103||104||105||106|
|Wide Fit >||94||95||96||98||99||101||103||104||106||107||108||109||111||112||114||115||117||118||120|
|Narrow Fit <||81||83||85||87||88||90||91||92||94||95||96||98||99||100||101||102||104||106||107|
|Wide Fit >||90||92||94||97||98||100||101||102||104||105||107||109||110||111||112||113||115||117||118|
Important - The mm size on the chart refers to the exact length of the last. Depending on your preferred fit (tight or roomy) please allow 2-4mm extra length when choosing your size.
Usually dispatched within 24 hours
4 instalments of £58.01 with clearpay
6 weekly payments from £38.67 with laybuy
Average connection time 25 secs
Average connection time 25 secs
Lighter, Stronger, Faster
No model typifies the Bont brand premise more perfectly than the 2017 Zero+.
With an improved anatomical last for even greater power transfer and support, full uni-directional carbon chassis and the new Durolite upper dimpled for improved aerodynamics, the 2017 Bont Zero+ is truly Lighter, Stronger & Faster.
Durolite Outer Skin
Strength to weight ratio's have always played an important part in Bont cycling shoe design as all materials considered and developed for products within the Bont range must comply to strict standards. Durolite has been developed and chosen for the Zero+ upper and liner for its extremely durable nature and light weight.
Unidirectional Carbon Chassis
The Zero+ has been upgraded to a matt carbon unidirectional finish to improve the aesthetics of the sole and further reduce the weight of the shoe.
BOA IP1 retention system has been introduced into the Zero+ design with dual directional and quick release dials for easy entry and exit. The nylon coated Kevlar wiring has been positioned to maximise the dispersion of retention load across the top of the foot.
TPU Toe Protector
The toe protector not only protects the front area of the shoe from wheel rub and impact, but also houses ventilation holes for improving airflow through the shoe.
The Zero+ is highly ventilated via integrated top mesh panels and ventilation holes throughout the side microfiber panels.
Between the outer leather and the liner we add a material that is proprietary to Bont to stop the cycling shoe from stretching over time. This material has similar strength characteristics to Kevlar. The material is stitched to the outer leather and bonded to the liner so it can never move or be removed, it becomes part of the cycling shoes structure. This layer assits in pedalling efficiency by maintaining a supportive structure over the top of the foot in the upward part of the pedal stroke.
A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, they only make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanics and ongoing research. At Bont, we have been perfecting our performance footwear lasts since 1975 and the process is ongoing. We believe we place more importance and thus place more effort into our last than any other cycling shoe brand and it is the reason that Bont cycling shoes continue to be a leader in providing the most functional and correct anatomical support to cyclists than any other brand on the market. Our motto in terms of cycling shoe fit is simple, "We make shoes for cycling, not walking."
Bont carbon fiber is sourced exclusively from the world's #1 carbon manufacturer, Toray of Japan. The base of the Zero+ is made by hand utilizing uni-directional carbon fiber which is embedded with epoxy thermo setting resin. The fibers are hand laid in the matrix according to the strain they will have to bear. The Zero+ utilizes unidirectional carbon fiber allowing Bont to create a performance cycling shoe with very specific strength characteristics based on stress points in cycling. As unidirectional carbon absorbs less resin then cross weave fibers, it also assists in the weight reduction of the cycling shoes.
The Zero+ utilises closed cell memory foam that will not retain water assisting in maintaining a lighter shoe during wet conditions as well as ensuring sweat which can begin to break down the durability of the shoe is not absorbed.
Medial Longitudinal Arch Support
Structural medial longitudinal arch support is provided in all models to stop over pronation of feet.
Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedaling phase due to internal rotation of tibia and femur. This can result in knee injuries.
In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain.
Anatomical Forefoot Shape
Conventional cycling shoes offer a “dress shoe” type shaping. Although highly aesthetic this will cause the toes along with the metatarsals to be overly constricted, compressing the nerves between the metatarsals which often results in the common "hot foot" sensation.
Bont cycling shoes anatomical shaping allows the foot to function in its most efficient and anatomically correct position. The foot is supported in its endeavour to relax through the metatarsal joints allowing the pedalling force to be spread across the greatest possible surface area.
Anatomical Heel Cup
The anatomical heel cup shaping of Bont cycling shoes provides increased stability during the pull through stage of pedaling stroke and up stroke. This stabilization is achieved without any mechanical operation or over tightening of straps/laces allowing for increased comfort and blood circulation.
Lateral Forefoot Support
Bont’s lateral forefoot support ensures neutral positioning of the forefoot and alleviates common issues associated with over pronation and supination. These issues often result in incorrect tracking of knees causing injuries along with hip and lower back pain.
- Model: Zero+
- Material: Unidirectional Carbon Monocoque Chassis with Durolite Upper and liner
- Stack Height: 3.6 mm
- Air Vents: Frontal area air vents and air gills in arch area
- Innersole: EVA thermo-moldable
- Sole Guards: Replaceable
- Padding: Memory Foam
- Cleat Mounting: MM grid plus grip / 3 Hole Look Configuration
- Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin
- Closing Options: Dual Dial Retention System with Kevlar wiring
- Weight: 230 grams
- Color Options: White, Black
- Sizing Options: Stock, Wide & Narrow Fit, Full Custom
How long will it take to arrive?
Please check the stock availability notice on your item when placing your order. This item is: In stock.
If ordered before 11pm, delivered by courier next working day.
How will I know it has been sent?
You will receive an email to confirm when your item has been sent.
You can also check the status of your order and individual items by accessing My Account details and following the prompts.
Please allow 10 working days from dispatch of your order before notifying us of any late deliveries.
It may be advisable to check with your neighbours to see if a parcel has been left with them, check any outhouses you might have where it may be left if it cannot fit through your letterbox and contact your local sorting office to see if the item has been returned to the depot as undelivered and awaiting collection.
If I'm not completely happy with my item?
Please see our returns policy.
There are currently no reviews.
Write a review to be in with a chance of winning a £100 voucher to spend on ProBikeKit.