Bont Vaypor XC Road Shoes

Durolite Outer Skin
Strength to weight ratio's have always played an important part in Bont cycling shoe design as all materials considered and developed for products within the Bont range must comply to strict standards. Durolite has been developed and chosen for the Vaypor XC upper.

BOA Dial And Velcro Closure
IP1 BOA dials have been fitted to the Vaypor XC for ease of adjustment. The BOA dial is centrally located to minimise potential damage normally associated with side mounted retention systems. The IP1 system includes dual directional micro adjustment as well as quick release functionality.

Velcro Forefoot retention to further assist in fit adjustment.

Grip Plate
Sole has been designed to maximize grip and minimize retention of dirt & mud. Grip components are replaceable with spike mounts located in toe section.

Bumpers
Bumpers fitted in key area to protect foot.

TPU Toe Protector
The toe protector protects the front area of the shoe from wheel rub and impact.

Anti Stretch
Between the outer leather and the liner we add a material that is proprietary to Bont to stop the cycling shoe from stretching over time. This material has similar strength characteristics to Kevlar. The material is stitched to the outer leather and bonded to the liner so it can never move or be removed, it becomes part of the cycling shoes structure. This layer assits in pedalling efficiency by maintaining a supportive structure over the top of the foot in the upward part of the pedal stroke.

Last Design
A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, they only make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanics and ongoing research. At Bont, we have been perfecting our performance footwear lasts since 1975 and the process is ongoing. We believe we place more importance and thus place more effort into our last than any other cycling shoe brand and it is the reason that Bont cycling shoes continue to be a leader in providing the most functional and correct anatomical support to cyclists than any other brand on the market. Our motto in terms of cycling shoe fit is simple, "We make shoes for cycling, not walking."

Carbon Fiber
Bont carbon fiber is sourced exclusively from the world's #1 carbon manufacturer, Toray of Japan. The base of the Vaypor XC is made by hand utilizing uni-directional carbon fiber which is embedded with epoxy thermo setting resin. The fibers are hand laid in the matrix according to the strain they will have to bear. The Vaypor XC utilizes unidirectional carbon fiber allowing Bont to create a performance cycling shoe with very specific strength characteristics based on stress points in cycling. As unidirectional carbon absorbs less resin then cross weave fibers, it also assists in the weight reduction of the cycling shoes.

Padding
The Vaypor XC utilises closed cell memory foam that will not retain water assisting in maintaining a lighter shoe during wet conditions as well as ensuring sweat which can begin to break down the durability of the shoe is not absorbed.

Medial Longitudinal Arch Support
Structural medial longitudinal arch support is provided in all models to stop over pronation of feet.

Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedaling phase due to internal rotation of tibia and femur. This can result in knee injuries.

In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain.

Anatomical Forefoot Shape
Conventional cycling shoes offer a “dress shoe” type shaping. Although highly aesthetic this will cause the toes along with the metatarsals to be overly constricted, compressing the nerves between the metatarsals which often results in the common "hot foot" sensation.

Bont cycling shoes anatomical shaping allows the foot to function in its most efficient and anatomically correct position. The foot is supported in its endeavour to relax through the metatarsal joints allowing the pedalling force to be spread across the greatest possible surface area.

Anatomical Heel Cup
The anatomical heel cup shaping of Bont cycling shoes provides increased stability during the pull through stage of pedaling stroke and up stroke. This stabilization is achieved without any mechanical operation or over tightening of straps/laces allowing for increased comfort and blood circulation.

Lateral Forefoot Support
Bont’s lateral forefoot support ensures neutral positioning of the forefoot and alleviates common issues associated with over pronation and supination. These issues often result in incorrect tracking of knees causing injuries along with hip and lower back pain.

Specifications:

• Model: Vaypor XC
• Material: Carbon Composite chassis with Durolite Upper & Faux Seude Leather Liner
• Stack Height: 4.4 mm
• Air Vents: Frontal area air vents
• Innersole: EVA thermo-moldable
• Sole Guards: Replaceable
• Padding: Memory Foam
• Cleat Mounting: MM grid plus grip / SPD compatible
• Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin
• Closing Options: Z form Velcro Straps + Boa dial (Replaceable)
• Weight: 385 grams