Zipp 303 NSW Carbon Clincher Tubeless Disc Brake Rear Wheel
Usually dispatched within 24 hours
6 weekly payments from £145.01 with laybuy
Average connection time 25 secs
Average connection time 25 secs
Ride away. Explore boundaries. Do so with speed, stability, and control. That’s the 303 NSW Carbon Clincher Tubeless Disc wheelset. Zipp’s 45mm rim depth proved ideal as a do-it-all wheels for cobbles, pavement, cyclocross, and gravel. Now add to that tubeless compatibility and options to run wider tires.
Without the constraints of rim brake caliper compatibility or brake-track requirements, our engineers were free to modify the NSW rim design to be disc-brake specific as well as to be more aerodynamically efficient and stable at the most common wind angles. For starters, the ABLC™ Sawtooth™ dimple design extends all the way to the rim’s edge. The result is greater AeroBalance™, our name for optimized aerodynamic efficiency and crosswind stability.
The 303 NSW Tubeless Disc-brake is optimized for wide tires to meet the performance needs of modern riders in search of low rolling resistance and high comfort. Additionally, our engineers carefully considered the rim-to-tire interface and how specific tire and rim widths affect aerodynamic performance. With an internal width of 21mm, the wheelset test fastest with a 28mm tire in the majority of wind angles.
Designed to be tubeless compatible, the 303 NSW Tubeless Disc brake wheels feature a rim bed made with internal ridges to lock the tire’s bead in place. A tubeless setup allows you to run lower tire pressure for more comfort while reducing the risk of pinch flats.
Cognition Disc Hubset
Every time a conventional hubset starts to coast, friction within the freehub ratchet mechanism works like a drum brake to slow the rider down. With the Cognition Disc-brake hubset’s Axial Clutch technology, we’ve reduced this drag by disengaging the ratchet mechanism when coasting. Our testing shows that the best traditional three-pawl hub designs have twice the rotating friction as our Axial Clutch equipped Cognition rear hub, and the most popular hubsets using a similar drive mechanism as Axial Clutch were found to produce four times the rotating friction.
All NSW rims are handmade in Indianapolis, where Zipp's engineering, manufacturing, and testing are conducted and includes "The Nest" advanced development lab where NSW was born.
Each Wheel Includes:
- Zipp Tangente Quick Release Skewer
- Zipp individual wheel bag
- Zipp Tubeless valve – factory installed
- Tubeless rim tape – factory installed
- Valve core removal tool
- Zipp Cognition thru-axle caps to fit 12x100, 15x100 and 12x142 dropouts
- Zipp Cognition oil – for rear hub service
- Freehub body spacer – 11 to 10 speed
We’ve employed Zipp’s ImPress™ graphics technology, which prints graphics directly on the wheel, to help allow the dimples to do what they were design to do – help control vortex shedding, the rate at which air sheds off the wheel. Managing this is crucial to stability. ImPress graphics also give NSW a distinctive stealthy look.
ABLC™ SawTooth™ Technology (Aerodynamic Boundary Layer Control)
Our new Sawtooth dimple design consists of 12 nodes that are specifically clocked to start aerodynamic shearing at a rate of 50hz at a rider speed of 20mph. Sawtooth accomplishes this by inducing small sheet vortices that shed at a low magnitude, but at a higher natural frequency, thus decreasing the laminar bubble effect on the aerodynamically shielded side of the rim’s profile to further reduce high yaw drag and improve crosswind stability.
- Weight: 810g
- Hub Used: Cognition Disc rear
- Brake Interface: Center locking – lock ring not included
- Hub Width: 135 / 142mm
- Rim Depth: 45mm
- Max Width: 28.9mm
- Internal Width: 21mm
- Spokes: Sapim® CX-Ray® J-bend
- Spoke Count: 24
- Spoke Pattern Non-Drive: 2 cross
- Spoke Pattern Drive: 2 cross
- Spoke Length Non-Drive: 266mm / J-bend
- Spoke Length Drive: 260mm / J-bend
- Max Tire Pressure: 125psi
- Max Tire Pressure: 8.62bars
- 10 or 11-speed Compatible Hub: Yes
- XDR Compatible: Yes
- Track Adaptable: No
- Dimpled Surface: Yes
- Nipples: Sapim® Secure Lock
- External Nipples: Yes
- Thru Axle Compatible: Yes
- Tubeless: Yes
How long will it take to arrive?
Please check the stock availability notice on your item when placing your order. This item is: In stock.
If ordered before 11pm, delivered by courier next working day.
How will I know it has been sent?
You will receive an email to confirm when your item has been sent.
You can also check the status of your order and individual items by accessing My Account details and following the prompts.
Please allow 10 working days from dispatch of your order before notifying us of any late deliveries.
It may be advisable to check with your neighbours to see if a parcel has been left with them, check any outhouses you might have where it may be left if it cannot fit through your letterbox and contact your local sorting office to see if the item has been returned to the depot as undelivered and awaiting collection.
If I'm not completely happy with my item?
Please see our returns policy.
There are currently no reviews.
Write a review to be in with a chance of winning a £100 voucher to spend on ProBikeKit.