Subtotal: ( items in your basket)
Usually dispatched within 24 hours
Average connection time 25 secs
Average connection time 25 secs
Ensure your spokes have the correct amount of tension with the Park Tool TM-1 Spoke Tension Meter. Designed to accurately measure the amount of absolute tension in each of the wheel's spokes, it also tells you the relative tension between all the spokes in the wheel. A great addition to your workbench, the device will work on almost any bicycle spoke. - L.M.
Please check the stock availability notice on your item when placing your order. This item is: In stock.
You will receive an email to confirm when your item has been sent.
You can also check the status of your order and individual items by accessing My Account details and following the prompts.
Please allow 10 working days from dispatch of your order before notifying us of any late deliveries.
It may be advisable to check with your neighbours to see if a parcel has been left with them, check any outhouses you might have where it may be left if it cannot fit through your letterbox and contact your local sorting office to see if the item has been returned to the depot as undelivered and awaiting collection.
Please see our returns policy.
Where reviews refer to foods or cosmetic products, results may vary from person to person. Customer reviews are independent and do not represent the views of The Hut Group.
Just used it this week while truing my mavic crossride 29 disc. Very easy to use. Scale was irrelevant as I could not find relevant data on my wheels and their spokes. I used the scale as a reference in comparison to the other spokes to make sure I was in range. For a non professional mechanic like me and the occasional use - great.
If you build wheels, get one of these! Makes it so easy to get even spoke tension and avoid breakages. One of my bikes has an electric hub motor and suffered from irregular spoke breakaages - since I evened up spoke tension in the new wheel, I've had no breakages. I spend a bit of time doing it, but you can get all the tensions on one side even, with a true wheel. It much more reliable for the DIYer, than tensioning to the right "ping"!
If you build you own wheels you need one! I was quite surprised at the difference in some of my spokes tension. I'd not be without one now!
A very handy addition to a cyclists toolbox. A wheel with well tensioned and balanced spokes will give optimal performance and reliability. This easy to use device allows you to get a reasonable idea as to the level of tension in wheel spokes and hence to asses whether adjustment is required. 90-100 KGF is a widely quoted figure for spoke tension and the conversion table supplied with the tool allows the user to establish if their spokes are correctly tensioned. It will also confirm if all spokes have similar tension, differences in spoke tension leads to stress points within the structure of the wheel which will affect performance and reduce life. If you have aspirations to build your own wheels or to optimise the wheels you currently own then such a tool will help. As with many other Park products this tool is a good compromise between cost and performance. More accurate tensiometers are available and I am sure at least as easy to use, but you'd need to be a really serious wheel builder or mechanic to justify the additional hundreds of pounds they cost.
I'm a road racer and amateur wheel builder.This product helped me immensely to master the wheel building craft.It is simple and uncomplicated device,would recommend it to anyone.
its been a great and easy tool to use to make sure the tension is right on my wheels.
Simply does all types of spokes and comes with a handy (and well researched table)...spoke tension is a fickle thing...and that this tool is at least relatively simple and usable; ticks all my boxes over it's much more expensive rivals