Effetto Mariposa Carbogrip (75ml)

A torque wrench is sometimes not enough when dealing with carbon parts, especially if those parts refuse to stay in place when tightened to the recommended torque values.

Carbo grip is the perfect complement to Giustaforza torque wrench. It is basically a special high-molecular weight silicone resin, in spray or blister forms. Applied on a component, it polymerizes in a time ranging from 3 to 5 minutes, creating an extremely grippy surface.

• Prevents part slippage and the dangerous, normal reaction when a seatpost or a handlebar slips at the recommended torque value: over-torquing the bolts!
• The polymer has anti-seize properties, allowing easy component removal when needed
• Waterproof
• Doesn’t scratch components (doesn’t contain sand or hard friction powder)
• Electric-insulator (preventing galvanic welding or corrosion)
• Can be easily removed with Carbomove or other petrol-based solvents

APPLICATIONS:
Carbogrip has been created as mounting paste for carbon components but also works great as thread-lock for steel, titanium, aluminium or carbon bolts)
Ideal for mountain bike grips: spread inside the grip, it makes sure the grip easily slides onto the handlebar, locking it in place when the resin polymerizes. The grips can then be removed blowing air inside them with a compressor, or with other procedures normally used to remove grips
Used on the bead lip of tubeless tyres it prevents bead movement for low-pressure

INSTRUCTIONS FOR USE (AS MOUNTING PASTE):
Carefully clean/degrease the mounting surfaces. Seatpost: remove grease traces inside the seat-tube too
Apply Carbogrip on the component and immediately mount it
Tighten the mounting bolts to the suggested torque value
Wait 5 minutes before using the component
Unwanted Carbogrip traces can be removed with Carbomove or other petrol-based solvents

TIPS:
Spray: if not using Carbogrip frequently (or forgetting to put the bottle cap after use) the resin could set inside the nozzle, blocking it. If that’s the case, just remove the nozzle: a droplet of Carbomove (or other petrol-based solvents) inside it will restore its functionality. Blister: if an opened blister is not emptied, the resin will polymerize and close the small opening, preserving the Carbogrip inside for more applications.